Stündenglass Modül + Dok Deluxe Travel Set - Clear Glass

About two hours at 3A

Up to 50, depending on temperature and time settings

Clear out the chamber of any residual material between sessions. Allow ample time for cooling before touching the chamber.

The Modül was designed specifically for Stundenglass. Hyer has fixed temperature and time settings where the Modül has a more customizable interface. Modul also introduces the ability to combust dry material.

850°F-900°F

The dry material tank combusts and does not vaporize.

No.

-Check the connection points to ensure everything is clean and connected properly. It is common for the tank to not sit flush and cannot make a proper connection. Try rotating the tank clockwise while gently pressing down to ensure a proper connection.

-If connection points are clean, you’ve ensured proper placement and there is still a connection error, try swapping out the tank.

Yes. The tank should be emptied and cleaned after each use.

You can use the including stirring tool to carefully remove any debris from the tank. After that, use a cotton swab with alcohol to get a deeper clean.

The timer will dictate how long your session will be activated for. This means, how long the Modul will stay at your selected temperature before shutting the heater off. You can adjust this setting for shorter or longer sessions to tailor the experience to the exact moment and need. Enjoy a short session to yourself or maximize the time for a longer session to share! (or more for you!)

Yes. There is an icon on the bottom right of the screen that indicates the current detected tank type.